| Item |
Test Method |
Specification |
| Insulation Resistance |
DC 500V |
More than100MΩ.m |
Dielectric strength between
conductors |
AC 500V，duration 1minute |
No material breakdown |
| Conduction Test |
DC3.0V 0.1mA |
No open and Short Circuit |
| Conductor Resistance Test |
Normal temperature and humidity |
≤2260mΩ/M |
| Coating thickness Test |
Indoor environment,test duration for 30seconds. |
Ni≧20ｕ”
Au≧3ｕ” |
| Match Test |
Continue to mate and unmate with the connectors for 30
cycles. |
Conductor not peeling |
| 180 degree folding test |
Folding Morther 20times |
No broken with insulation and no open
circuit |
| Abrasion Test |
0.5R 600g, 60 times/Min,More than 10,000 Times |
No broken with insulation and no open
circuit |
| Flexibility Test |
R:10mm,Speed:160cycles/min.Displacement:30mm,More
than 100,000 Times |
No broken with insulation and no open
circuit |
| Heat Resistance Test |
105℃ for 96hours |
Insulation resistance≥100MΩ.m
Dielectric strength test with
AC500V/1min no brokendown |
| Cold Resistance Test |
-40℃ for 96hours |
Insulation resistance≥100MΩ.m
Dielectric strength test with
AC500V/1min no brokendown |
| Humidity Resistance Test |
40℃,95﹪RH,96H |
Insulation resistance≥100MΩ.m
Dielectric strength test with
AC500V/1min no brokendown |
| Temperature Cycle Test |
[-40℃*(4H)→25℃*(1H)→105℃*(4H)→25℃*(1H)] × 5
cycles |
Insulation resistance≥100MΩ.m
Dielectric strength test with
AC500V/1min no brokendown |
| Salt Water Spray Test |
Temperature：35℃ Salt concentration：5%
Duration：48H Salt PH value：6.5-7.2
Sample located angle:15º-30º |
No bare conductor |
| Adhesive force of Conductor |
Normal temperature and humidity |
（WIQA08） |
Adhesive force of supporting
tape |
Normal temperature and humidity |
（WIQA08） |
